

ROC800-Series Instruction Manual
Revised Jul-14
Input/Output Modules
4-23
Figure 4-29 shows the field wiring diagram for the MVSI/O module.
Figure 4-28. MVS Field Wiring
Figure 4-29. MVS I/O Field Wiring
Note
:
A “star” configuration for transmitters may not be reliable.
Terminations are recommended for long distances (greater that 1000
meters) at the extreme ends of the circuit. Terminate the two outermost
devices to reduce signal reflection in the circuit. The MVS termination
jumper is located at J4 on the module. Refer to
Table 4-4
and
Figure 4-
30
.
Table 4-4. MVS Termination
Jumper
Terminated
Not Terminated
TER
OUT
TER
OUT
J4
x
x