Background Image
Table of Contents Table of Contents
Previous Page  53 / 182 Next Page
Information
Show Menu
Previous Page 53 / 182 Next Page
Page Background

ROC800-Series Instruction Manual

Revised Jul-14

Power Connections

3-1

Chapter 3 – Power Connections

This chapter discusses the Power Input modules. It describes the

modules, explains how to install and wire them, and provides

worksheets to help you determine—and tune—the power requirements

for the I/O and communications modules you can install in the ROC800

and the EXPs.

In This Chapter

3.1 Power Input Module Descriptions........................................................................3-1 3.1.1 12-Volt DC Power Input Module (PM-12) ................................................3-1 3.1.2 24-Volt DC Power Input Module (PM-24) ................................................3-3 3.1.3 30-Volt DC Power Input Module (PM-30) ................................................3-4 3.1.4 Auxiliary Output (AUX+ and AUX–) .........................................................3-8 3.1.5 Switched Auxiliary Output (AUXSW+ and AUXSW–)............................3-10 3.2 Determining Power Consumption......................................................................3-11 3.2.1 Tuning the Configuration .......................................................................3-15 3.3 Removing a Power Input Module ......................................................................3-25 3.4 Installing a Power Input Module ........................................................................3-26 3.5 Connecting the ROC800 to Wiring ....................................................................3-27 3.5.1 Wiring the DC Power Input Module .......................................................3-27 3.5.2 Wiring the External Batteries .................................................................3-29 3.5.3 Replacing the Internal Battery ...............................................................3-30 3.6 Additional Technical Information .......................................................................3-32

3.1 Power Input Module Descriptions

The ROC800 uses a Power Input module to convert external input

power to the voltage levels the electronics require. The module also

monitors voltage levels to ensure proper operation. Three Power Input

modules—12 Vdc (PM-12), 24 Vdc (PM-24) and 30 Vdc (PM-30)—are

available for the ROC800.

The power consumption of a ROC800 and any attached expandable

backplanes determines the current requirements for the external power

supply. Refer to

Section 3.2

,

Determining Power Consumption

for a

discussion and worksheets on assessing power requirements.

The Power Input module has removable terminal blocks for wiring and

servicing. The terminal blocks can accept sizes 12 to 22 AWG

(American Wire Gauge) wiring.

3.1.1 12-Volt DC Power Input Module (PM-12)

Using the PM-12, the ROC800 can accept 12 Volts dc (nominal) input

power from an AC/DC converter or other 12-volt dc supply. The input

source should be fused and connected to the BAT+ and BAT– terminals

(see

Figure 3-1

). The Power Input module uses 3.3 Volts dc switching

power to provide power to the ROC800-Series modules via the

backplane. The ROC800 requires 11.5 to 14.5 Volts dc for proper

operation.