Conduit Entry (1/2)
Flexible access points allow easy wiring to the terminal box available in ½” NPT Imperial connections.
Close
Conduit Entry (2/2)
Flexible access points allow easy wiring to the terminal box available in ½” NPT Imperial connections.
Close
Hall Effect Sensor
Linkage-less non-contact position feedback technology eliminates issues associated with moving parts including wear, loosening, corrosion, and vibration damage.
Close
Mountings
Leverages FIELDVUE™ non-contact mountings that comply with IEC 60534‐6‐1, IEC 60534-6‐2 and NAMUR mounting standards.
Close
Conduit Entry (1/2)
Flexible access points allow easy wiring to the terminal box available in ½” NPT Imperial connections.
Close
Conduit Entry (2/2)
Flexible access points allow easy wiring to the terminal box available in ½” NPT Imperial connections.
Close
Hall Effect Sensor
Linkage-less non-contact position feedback technology eliminates issues associated with moving parts including wear, loosening, corrosion, and vibration damage.
Close
Mountings
Leverages FIELDVUE™ non-contact mountings that comply with IEC 60534‐6‐1, IEC 60534-6‐2 and NAMUR mounting standards.
Close
Switch 1 and Switch 2
Switch 1 and 2 are 30VDC at 1 amp maximum that are configurable solid state, dry contact limit switches.
Close
Loop Terminal
4-20 mA with HART connection
Close
Configuration Lock Switch
A dip switch that enables or disables protection.
Close
Fault High or Low Switch
A dip switch that sets the transmitter fail high (HI) or low (LO).
Close
Push Button Calibration
The Push Buttons permit calibration without the use of a handheld or host.
Close
LED Status
LED shows the valve health status.
NE107 Valve Health Indicators |
Solid |
|
|
Good |
Blinking |
|
|
Maintenance Required |
Blinking |
|
|
Out of Specification |
Blinking |
|
|
Check Function |
Solid |
|
|
Failed |
Close