Natural Gas Technologies - Solutions for the Natural Gas Industry - page 29

29
Introduction
The CSB600 / CSB700 Series
direct‑operated, spring-loaded regulators
have been engineered to fit a multitude of
pressure-reducing applications including
commercial and industrial installations.
This flexibility is provided by the numerous
body sizes and end connections, outlet
pressure settings, as well as the option for
internal or external pressure registration.
In addition to application flexibility, the
CSB600 / CSB700 offer overpressure
protection options, which include an
integral slam-shut and also token relief
to meet your demands on application
requirements.
The CSB600 / CSB700 Series are in
conformity with the Pressure Equipment
Directive PED 97/23/EC. The base
regulator is classified under Category I,
the regulator with slam-shut module is
classified under Category IV.
Body Sizes andEndConnection Styles
Ductile Cast Iron:
1-1/4 (CSB600 only), 1-1/2 or 2 NPT
1-1/4 (CSB600 only), 1-1/2 or 2 Rp
NPS 2 (DN 50) CL125FF, CL150FF
NPS 2 (DN 50) PN 10/16
NPS 1-1/4 (DN 32) (CBS600 only)
NPS 1-1/2 ( DN 40) PN 16 Slip-on
Steel:
1-1/4 (CSB600 only), 1-1/2 or 2 NPT
1-1/4 (CSB600 only), 1-1/2 or 2 Rp
NPS 2 (DN 50) CL150RF
NPS 2 (DN 50) PN 10/16
MaximumOperating Inlet Pressure
Differential Strength
5 to 16 bar (depending on type)
Maximum Emergency Inlet
Pressure Differential Strength
20 bar
Outlet Pressure Range
8.6 mbar to 4 bar
• Slam-shut
• Ductile Cast Iron andWCC
Steel Bodies Available
• Wide Variety of Body
Sizes and End Connections
• No Special Tools for
Pressure Adjustment and
Orifice Removal
Features
Maximum Emergency Outlet
Pressure (Casing)
5 bar
MaximumOutlet Pressure to avoid
Internal Parts Damage
0.34 bar over set‑point
MaximumOperatingOutlet Pressure
3 bar
Pressure Registration
Internal or external
Temperature Capabilities
According to PED Standards:
-20° to 60°C
Non-PED:
-30° to 66°C
Approximate Weights
Threaded Body:
Type CSB600/700:
4.1 kg
Type CSB604/704:
5 kg
Flanged Body:
Add 4.1 kg to weights listed above
Type VSX8 Slam-Shut Module
Specifications
Standard Overpressure Shutoff (OPSO)
Set Value:
43 to 4400 mbar
Standard Underpressure Shutoff
(UPSO) Set Value:
10 to 2000 mbar
Connections
Slam-Shut Vent:
1/4 NPT
External Sensing Line:
1/4 NPT
Casing Material
Aluminum
Pressure Registration
Internal or external
Type CSB650/750
Type CSB600 / CSB700
Spring-Loaded Pressure Reducing Regulators
For full details consult the documenta-
tion available on our website:
Internal viewof Type CSB604/704
AVAILABLESOON
1...,19,20,21,22,23,24,25,26,27,28 30,31,32,33,34,35,36,37,38,39,...56
Powered by FlippingBook